Documents regarding post-9/11 prisoner transport flights released

Filed in Uncategorized Leave a comment

Friday, September 2, 2011

During a court case between two US charter aircraft companies, documents have been released detailing flights chartered by the US government from private sector companies in the aftermath of the 9/11 attacks to transport prisoners suspected of links to terrorism.

The documents, totalling more than 1,700 pages, were released as part of a court case dating to 2007 between Sportsflight and Richmor Aviation. The case concerned over US$1.15 million Richmor claimed it was owed by Sportsflight to cover costs associated with flights operated for the US government by DynCorp, another company involved in what have been dubbed rendition flights. Both companies referenced the practice in their legal arguments.

Details within the files, including flights of aircraft, correspond to known flights made as part of the program; for example, one file matches the transportation of Abu Omar, an Egyptian cleric, to Cairo, where Omar claimed he was tortured. Another matches the transportation of Encep Nuraman, an Indonesian terrorist.

Other disclosures include that DynCorp, a major government contractor, was the main contractor for the rendition flights; Dyncorp had not been previously linked to the program. It was also revealed that letters from the US State Department were used to provide diplomatic cover for the operations, as well as evidence that the letters were possibly not genuine, since an official that signed them does not seem to exist.

According to the files, Richmor, working with DynCorp, provided private jets and crews to the US government between May 2002 and January 2005, at a rate of about once a month. The planes were provided with State Department letters claiming their operations were “global support for U.S. embassies worldwide,” and signed by a Terry A. Hogan, whom an Associated Press investigation failed to locate.

The rendition flights were operated by DynCorp, which used aircraft supplied by Richmor, while Sportsflight and another broker, Capital Aviation, handled the finances.

Rhode Island borrows $90 million from US for jobless claims

Filed in Uncategorized Leave a comment

Thursday, October 1, 2009

Rhode Island will receive US$90 million in funding from the United States federal government to support unemployment benefits in the state.

Rhode Island’s Department of Labor and Training stated on Wednesday that it requested the line of credit because the account utilized to provide funding to unemployed individuals in the state had decreased to only $2 million; enough to last only a few days.

Unemployment insurance customers will not experience any delays in receiving their weekly payments.

In a statement released by the Department, the agency said: “Unemployment insurance customers will not experience any delays in receiving their weekly payments.”

Unemployment in Rhode Island was 12.8 percent in August 2009 – the third-highest rate in the United States. During the first eight months of 2009, Rhode Island’s state unemployment insurance trust fund has provided over $300 million in unemployment benefit funding.

In addition to Rhode Island, 20 other states have outstanding balances on money they borrowed from the Federal Unemployment Account of the United States Department of Labor. Rhode Island has an outstanding balance of approximately $90.68 million due to the account. The loans are interest-free until December 2010.

How To Use Twitter: Make Friends And Money With Twitter

Filed in Marketing Leave a comment

By Peter Nisbet

Making money with Twitter is not difficult, and while everybody wants to know how to use Twitter properly very few do. Yes, you can log on and tweet, but do you really know how to use it? Do you know how to attract the followers that you want, or how to choose the tweeters that you want to follow?

Most people are happy having as many followers as possible, but why are they following you? Why do people who don’t have a clue who you are want to follow you? Unless you can answer questions such as these then you do not know how to use the site, let alone how to make friends and money from Twitter.

That’s right – make money! It is possible to make money with Twitter by using it as it can be used, but you have to know how to do that. Twitter can be used to drive masses of traffic to your blog, Squidoo lens or website. There is nothing illegal about it, and Twitter will not throw you off: in fact they will welcome it. The reason for that is that the owners want it to be as popular as possible and to have as many Twitter users and followers as they possibly can get.

[youtube]http://www.youtube.com/watch?v=cRmvI0gYKhg[/youtube]

Part of that might be due to reported bids for Twitter from Rupert Murdoch, Apple and Facebook, and perhaps even Google: obviously the busier and more popular the site is then the higher its value. However, a lot has also got a lot to do with pride, and the more uses to which people can put the site then the less it will be known as a one trick pony, useful only for short tweets but nothing else.

If it becomes a useful means of internet marketing, and can be extended into a mainstream income earner, then Twitter will assume a new dimension and not only increase its value but also its reputation as a more solid WEB2 site and not just a bit of frippery on the periphery of real internet marketing entities. You can make money with Twitter, mainly by using it as a marketing tool to drive traffic to your blog or website. You can also use Twitter to send visitors to your MySpace, Facebook or YouTube pages and any other web presence that you have such as your Squidoo lens.

Anybody can do it, not only the experienced internet marketers, and if you have an idea that you can sell, or even a physical product that you want to promote, then there are ways to do that extremely effectively using the application – but first you have to understand how to use Twitter for more than just tweeting.

What you need is good professional instruction, not only on how to make friends and communicate, but also how to make money with Twitter. Not many are doing so right now, but if you feel that this is a growing medium, of which there is absolutely no doubt, then you must make sure that you don’t miss the boat. You can use Twitter without spamming, and without annoying any of the other tweeters that use it.

In fact many might want to join you, since they will learn a lot more about this fabulous communications technique than they do right now. Once you understand how Twitter can be used to the maximum of its potential then you can pass that information on free if you want.

First, however, you have to understand the basics of Twitter. You might believe that you know all there is to know, but don’t be silly! Nobody knows that, not even me, and I know a heck of a lot. Nevertheless there is still a lot to be learned, and you should start learning right now before you get left behind.

By learning how to use Twitter properly, you will broaden your outlook and enjoy tweeting much more, and if you know how to make money with Twitter when you need it, then these sudden expenses that come along will no longer pose problems. By combining the benefits of WEB2 sites such as Squidoo, Facebook, YouTube and Twitter you can create a marketing entity so powerful that you find it difficult not to make money.

About the Author: To learn how to use Twitter properly, and also how to make friends and money with Twitter, visit Pete’s page at

Twitter Traffic

where you find out how to learn everything you need on video, and also how to make a start at making some pocket money for yourself

Source:

isnare.com

Permanent Link:

isnare.com/?aid=397340&ca=Internet

5-year old American girl dies after visiting the dentist

Filed in Uncategorized Leave a comment

Friday, September 29, 2006

Diamond Brownridge, a 5-year old girl from Chicago, Illinois, has died after a visit to the dentist. Children’s Memorial Hospital officials say that the girl was rushed to the hospital when she never woke up after being sedated for a dental procedure. She had been in a coma, on life support, since being admitted to the hospital early in the weekend.

“She passed very peacefully and beautifully,” said the hospital in a statement that the family issued.

Ommettress Travis, the mother of the girl, was asked not to remain inside the room while dentists were operating on the girl to repair two cavities and to have at least two caps replaced. Travis says after thirty minutes she was asked to come back in and found Brownridge not breathing, in the dentist chair.

Hicham Riba, a specialist and professional in anesthesia, who was also licensed, was the dentist in charge of the procedure.

“My family and I are so sad. May God bless Diamond and her family. Every time you have a tragedy like this, you pray more. I don’t think I will ever go back to a normal life after an experience like this,” Riba said in a statement on Wednesday, September 28.

According to the family, the girl had been given at least a triple dose of medicine that sedated her. Those drugs include: nitrous oxide gas, a single dose of an “oral agent” and an IV.

A judge has ordered that all equipment and materials used during the operation be protected and examined. The girl’s medical records have also been ordered to be examined.

There is no word on whether or not any charges will be filed against Riba or any of the dentist’s staff.

Designer Engagement Rings What Is The Difference?}

Filed in Diamonds Leave a comment

Designer engagement rings – What is the difference?

by

Vasco Kirov

The title designer applied to any jewelry piece instigates ideas of high quality, exclusivity and individuality. It is however not properly clarified and sometime by my opinion misused. Marketers have their tools and use them shrewdly wherever possible. If you think of it, the design is the first process of creating jewelry and designer`s efforts (some more successful than other) lay behind every single piece, including the low end mass produced ones. Does that make them designer jewelry? On the other hand what defines designer jewelry and how much of a deviation from an existing design, for example classic solitaire, constitutes new one. There is no base for precise classification of design changes and the definition of some terms often used in the jewelry industry presented bellow is my own.

The term Designer Jewelry should be applied to pieces representing individual style a particular designer is trying to promote. In engagement ring field this style is usually defined by using certain unusual technique (mokume, granulation), unusual way of setting the diamond/s, specific recognizable shape (organic , geometrical), unusual metal alloys bringing new color or mechanical properties, unusual surface texture and many more. The common denominations are unusual and recognizable. I believe that there is no need for major change to constitute designer engagement ring. The famous Niessing tension set ring for example is nothing more than a excessively thick comfort fit wedding band with small sector cut off to accommodate (clip) the diamond. It is still considered however as one of the greatest jewelry designs ever and sold by thousands every year. Sometimes the designers touch is hardly noticeable at first glance especially when applied to classic based rings. Tapering the prongs and increasing the angle of the basket of a classic solitaire for example, creates much lighter and open setting while the thicker metal at the top offers superb safety. Such small change however creates very elegant design line and significantly improves the overall appearance and safety of the setting. When asked for opinion the customer usually answers: It definitely looks different but I don`t know why

[youtube]http://www.youtube.com/watch?v=XR560wLd8Nc[/youtube]

Designer diamond engagement rings are not necessarily unique and are reproduced in relatively big volumes. This makes them different from the studio and ones off pieces. With the studio type jewelry, the designer is the goldsmith and gemologist, executing his / hers pieces from A to Z and once off pieces are the bulk of his/hers work. These are still not unique though, since most of them are reproducible by the same artist but they are definitely a limited edition. Limited editions and once offs can be clearly separated by natural and intended.

The natural limitation is dictated by the availability or uniqueness of certain materials, usually precious stones that does not allow big volumes. Extreme labor and skill requirements can also be viewed as natural limitation. On the other hand, intended limitation is catering for customers prepared to pay higher price for their jewelry, in order to preserve its uniqueness. The intended limited editions are usually accompanied by certificate stating the total number of manufactured pieces, as well as the manufacturing process (handmade. cast assisted etc.) A number stamp on the piece, states the consecutive number opposed to the total number manufactured. For example 3/10 indicates that this is the third piece out of ten possible. What number constitutes limited edition is arguable. My opinion is; it should not be more than a dozen.

Vasco Kirov is an experienced designer and master goldsmith with vast knowledge in every aspect concerning fine jewelry. His innovative

online jewelry studio

has large picture library where you can find inspiration for your

designer engagement ring

and with Vascos help have it tailored to suit your taste and budget.

Article Source:

Designer engagement rings – What is the difference?}

GM and Chrysler receive Canadian loans amid US restructuring ultimata

Filed in Uncategorized Leave a comment

Friday, April 3, 2009

General Motors (GM) and Chrysler will receive bridge loans from the government of Canada and the provincial government of Ontario, however no more will be forthcoming from either Canadian or US governments unless the companies can reinvent themselves.

“This is a regrettable but necessary step to protect the Canadian economy. We are doing this on the assumption that we obviously cannot afford either in the United States or Canada a catastrophic short-term collapse.” said Stephen Harper, Prime Minister of Canada.

“We cannot, we must not, and we will not let our auto industry simply vanish. This industry is, like no other, an emblem of the American spirit; a once and future symbol of America’s success,” said Barack Obama, President of the United States. “These companies – and this industry – must ultimately stand on their own, not as wards of the state.”

Chrysler will receive CA$1 billion and may in fact be eligible for as much as CA$4 billion. If Chrysler succeeds in the next 30 days with a restructuring plan it would be eligible for a US$6 billion loan. A part of Chrysler’s restructuring plan must include a partnership with Fiat within 30 days to appease the US administration. Fiat is a supplier of smaller fuel-efficient vehicles, and the merger will help Chrysler to be viable in the North American market. A Chrysler court bankruptcy would inevitably lead to it being sold off.

As a part of Chrysler’s restructuring plans, Tom LaSorda, the president of Chrysler announced that Canadian operations would fold if it does not receive both the US commitment of $2.3 billion of aid and a new Canadian Auto Workers CAW contract to reduce all-in costs by CA$19 per hour. As a result of this announcement Chrysler’s auto sales volume in Canada dropped 23% compared to March of 2008.

GM has until the end of May to restructure its company to receive up to CA$7.5 billion. As part of the companies restructuring, General Motor’s chief executive Rick Wagoner was replaced Sunday with Fritz Henderson, the current chief operating officer. Henderson spoke out on Tuesday that GM has submitted a restructuring plan which would close five plants, and this may be increased to meet the requirements for financial aid. He is in full compliance with Obama’s auto task force to seek bankruptcy if GM cannot negotiate with their unions, bondholders and others.

GM recently brought forward the “GM Total Confidence” program providing consumer purchase protection for customers who lose their job for economic reasons within the first two years from purchase. As a result of Chrysler’s restructuring announcement in Canada, GM’s Canadian vehicle sales volume fell only 17.3% compared to 2008, an increase from the previous month.

GM must reduce some of its legacy costs which include its pensions and union health care costs. A part of GM’s ailments arose from investing in supplying truck and SUVs during an economy of high gas prices when consumers were demanding fuel efficient vehicles.

Tony Clement, Canada’s Minister of Industry, is hoping that the CAW will support the restructuring process and re-negotiate their agreement. Whereas a United Auto Workers negotiator has said, “I don’t see how the UAW will do anything until they see what the bondholders will give up.”

The Obama administration is looking toward bankruptcy proceedings for the automakers, “as a mechanism to help them restructure quickly and emerge stronger. [It will] quickly clear away old debts that are weighing them down. What we are asking is difficult. It will require hard choices by companies. It will require unions and workers who have already made painful concessions to make even more. It will require creditors to recognise that they cannot hold out for the prospect of endless government bailouts.” said Obama.

The auto parts suppliers and IT software exporters in India have already been affected by the declining auto sales. GM and Chrysler software contracts provide US$300 to 350 million a year to vendors in India. As well these two major automakers usually award US$1 billion contracts to auto parts suppliers. “We are worried and closely watching the developments in the US to gauge the impact. The decline in auto sales in the US has already hit the order books of Indian suppliers,” said a Delhi auto parts supplier.

“Going forward, the industry will undoubtedly be smaller, but if our efforts are successful it will be viable and it will support good jobs for Canadians,” said Clements.

Betty Sutton, Ohio’s Congresswoman put forward the CARS act which provides a US$3,000 to 5,000 incentive for those who trade in their vehicle for a fuel-efficient car. “It clearly stimulates the economy, and it gets the consumer into the showroom and gets them buying again. But importantly — and this is what I particularly like about it — it really helps the environment quite a bit in two respects.” said William Clay Ford Jr., executive chairman of Ford Motor Co.

Ford Motor Company has not come forward with requests for assistance.

Since December GM and Chrysler have received US$17.4 billion government loans.

HAVE YOUR SAY
How should the automakers re-invent themselves?
Add or view comments

Commonwealth Bank of Australia CEO apologies for financial planning scandal

Filed in Uncategorized Leave a comment

Thursday, July 3, 2014

Ian Narev, the CEO of the Commonwealth Bank of Australia, this morning “unreservedly” apologised to clients who lost money in a scandal involving the bank’s financial planning services arm.

Last week, a Senate enquiry found financial advisers from the Commonwealth Bank had made high-risk investments of clients’ money without the clients’ permission, resulting in hundreds of millions of dollars lost. The Senate enquiry called for a Royal Commission into the bank, and the Australian Securities and Investments Commission (ASIC).

Mr Narev stated the bank’s performance in providing financial advice was “unacceptable”, and the bank was launching a scheme to compensate clients who lost money due to the planners’ actions.

In a statement Mr Narev said, “Poor advice provided by some of our advisers between 2003 and 2012 caused financial loss and distress and I am truly sorry for that. […] There have been changes in management, structure and culture. We have also invested in new systems, implemented new processes, enhanced adviser supervision and improved training.”

An investigation by Fairfax Media instigated the Senate inquiry into the Commonwealth Bank’s financial planning division and ASIC.

Whistleblower Jeff Morris, who reported the misconduct of the bank to ASIC six years ago, said in an article for The Sydney Morning Herald that neither the bank nor ASIC should be in control of the compensation program.

KKE: Interview with the Greek Communist Party

Filed in Uncategorized Leave a comment

Thursday, May 13, 2010

Wikinews reporter Iain Macdonald has performed an interview with Dr Isabella Margara, a London-based member of the Communist Party of Greece (KKE). In the interview Margara sets out the communist response to current events in Greece as well as discussing the viability of a communist economy for the nation. She also hit back at Petros Tzomakas, a member of another Greek far-left party which criticised KKE in a previous interview.

The interview comes amid tensions in cash-strapped Greece, where the government is introducing controversial austerity measures to try to ease the nation’s debt-problem. An international rescue package has been prepared by European Union member states and the International Monetary Fund – should Greece require a bailout; protests have been held against government attempts to manage the economic situation.

Four British energy suppliers face investigation into claims of misselling

Filed in Uncategorized Leave a comment

Sunday, September 5, 2010

The Office of Gas and Electricity Markets (Ofgem), the regulator of the electricity and gas markets in Great Britain, has launched an investigation into four of the largest British energy suppliers over suspicions that they not be complying with face-to-face and telephone sales regulations. The four organisations facing scrutiny could be fined up to 10% of their annual turnover if it is found that they are breaking sales regulations. Scottish Power, npower, Scottish and Southern Energy and EDF Energy are all to face questioning by the organisation.

Ofgem has urged customers of the four companies to alert the energy regulator, “if they are concerned about the sales approach any domestic suppliers have taken when selling energy contracts, either face-to-face or by telephone,” according to a statement. “As part of the investigation process Ofgem will examine any evidence of non-compliance and consider whether there are grounds for exercising enforcement powers.”

New regulations on sales tactics by energy suppliers were recently introduced, and, Ofgem has said, energy suppliers must be “proactive in preventing misselling to customers both face to face and over the phone. Also, if suppliers are selling contracts face to face they must provide customers with an estimate before any sales are concluded. In most circumstances customers should also receive a comparison of the supplier’s offer with their current deal.” Only one in five consumers consider energy suppliers to be trustworthy, and 61% of people feel intimidated by doorstep sales people from energy companies. According to the organisation Consumer Focus, “complaints have declined since new rules came into effect this year, but suppliers still seem to be flouting the rules. Some customers are still being given misleading quotes and information, which leave them worse off when they switch provider.”

The newspaper The Guardian has reported that “householders are reporting that sales agents working for the energy suppliers are giving them misleading information and quotes which leave them worse off when they switch supplier.” Consumer Focus has said that if energy companies continue to break the rules, they could be banned from doorstep-selling completely. The report goes on to say that “new figures from helpline Consumer Direct show that while the number of complaints has fallen since last year, about 200 cases of mis-selling are being reported each month.” However, Scottish Power said it insists on “the highest standards possible for all of our sales agents”, and npower told the Financial Times that it was “confident that the processes we have in place mean that we comply with our regulatory obligations”. EDF added that it was “fully compliant with all obligations regarding sales of energy contracts”.

According to the regulator, the obligations are serious and must be followed by energy supplies, or they will face “tougher sanctions than those available under more general consumer protection law.” Ofgem has published a guide advising consumers what they should do should an energy salesperson contact them in person of by telephone. Improper sales tactics are still common in the industry—in 2008 an Ofgem investigation found that 48% of gas customers and 42% of electricity customers were worse off after switching supplier on the doorstep. Npower was fined £1.8 million in 2008 by the organisation, and Ofgem insists that they are “committed to taking action” over improper sales activities by energy companies. “Suppliers have existing obligations to detect and prevent misselling and new licence conditions were brought in following our probe to further increase protection for customers,” said Andrew Wright, a Senior Partner of the regulator. “We expect all suppliers to comply with these tougher obligations but if our investigations find otherwise we will take strong action.”

HAVE YOUR SAY
What are your experiences with doorstep salespeople? If they persuaded you to change energy providers, were you worse off as a result?
Add or view comments

Head of energy at Consumer Focus, Audrey Gallacher, called the investigation “a welcome step … to address years of customers getting a bad deal on energy prices on their doorstep. While many doorstep sales people will do a good job, the pay and rewards system continues to encourage mis-selling, despite years of regulation and voluntary initiatives. If better advice for customers and enforcement of the tougher rules doesn’t end the flagrant abuse of this form of selling the big question will be whether it should be completely banned.” Christine McGourty, director of Energy UK, which represents the leading gas and electricity companies, said that “the companies involved will collaborate with the Ofgem investigation and are awaiting further details from the regulator. Any sales agent in breach of the code will be struck off the approved energy sales register.” Which? chief executive, Peter Vicary-Smith, has said he considers the situation “shocking”, saying that the investigation “will do nothing to improve consumer trust in energy suppliers. We’re pleased that Ofgem has promised tough measures against any firms guilty of mis-selling. We hope it uses this opportunity to tighten rules around telesales so they are in line with those for face to face sales.”

SNP Westminster Energy spokesperson Mike Weir MP, however, said that the investigation “does nothing to tackle the real problem of fuel prices which leave many Scots facing great difficulty in heating their homes … Rather than tinkering around the edges Ofgem should be looking at how to reduce prices for vulnerable households.” Gareth Kloet, Head of Utilities at Confused.com, one of the UK’s biggest and most popular price comparison services, also welcomed the inquiry. “It is unacceptable for energy companies to mislead customers like this,” he said, adding that Confused.com has previously “urged energy providers to either stop the practice of doorstep selling or make it very clear to households that better deals are available online. There is no reason why door-to-door salesmen can’t show people online deals and even help households switch to them.”

“Our research reveals customers could end up paying £167 more than they need to as door-to-door salesmen are unable to offer the discounts that are applied online. The changes that have been made to date are a welcome addition to safeguard customers; however this review has been much needed for a long time. Hopefully it will mark the end of customers being overcharged and missold,” Kloet continued. “Our message to energy consumers remains the same: they should shop around online to make sure they’re getting the best deal possible and turn these salesmen away.”

When Dental Extractions In Chicago Are Necessary

Filed in Dentistry Leave a comment

byAlma Abell

What most adults fear most about the dentist is the need for dental extractions in Chicago. A tooth extraction means that the dentist removes the tooth from your mouth. In many cases, it can be pulled out quickly, but in some cases it requires more effort. Your mouth will be numbed with a shot of Novocain, or you may be sedated before the procedure. However, most people wonder if an extraction is necessary or if there are other options.

Impacted Teeth

The main reason for a tooth extraction is that your tooth is impacted or infected. This means that the tooth in question is in such a position that it will erupt through the gums into another tooth, soft tissue or bone. Impaction typically occurs in wisdom teeth for adults, because all other teeth are fully grown. However, children can also have impacted teeth, which need to be dealt with immediately.

Wisdom Teeth

Typically, wisdom teeth are the biggest problems for adults. These teeth start coming in around the age of 21 and can take years to erupt fully. Most adults do not have enough room in their mouth for the teeth to come in entirely, meaning they could become impacted, decayed or infected. Once your wisdom teeth start to come in, it’s time to visit the dentist to ensure there won’t be problems.

Tooth Decay

Sometimes, dental extractions are necessary because of excessive tooth decay. Once your tooth has decayed enough, there isn’t much a filling can do. Sometimes a root canal is possible if the infection hasn’t gone too deep. Otherwise, an extraction will be necessary. Once the tooth has been pulled, you’ll need to consider whether to leave it alone or replace it with an implant, partial denture or bridge.

No Room

Teeth can shift over time, especially if you had trauma or wisdom teeth erupt. Whenever there is no room for all your teeth, an extraction could be necessary to relieve stress on other teeth and to make more room.

Orthodontics

Currently, orthodontic options are available to help with many of the problems facing people, making an extraction unnecessary. Before, it was easier to remove the teeth that wouldn’t fit in the mouth, but newer technology is available that can help expand the mouth, making an extraction unnecessary.

Dental extractions in Chicago aren’t pleasant to think about, but may be necessary. Chicago Smile Design offers dentists that understand your worry and will do everything they can to prevent the need for extraction. Visit them today to learn more.

TOP